Operation
All-in-one spout
The WMF 1000 is fitted with a unique system which for many years has been standard on our
professional machines: The all-in-one spout. It dispenses coffee and milk foam simultaneously
and its height can be set steplessly so that you can place anything from an espresso cup to a
latte macchiato glass beneath it.
The adjustment height ranges from 75-135 mm.
Adjusting the height
>
Hold the all-in-one spout between your thumb and forefinger and press the right adjustment
lever towards the spout
>
Push the all-in-one spout to the desired height
>
Release the adjustment lever
Positions of the all-in-one spout
The uppermost position of the all-in-one spout is reserved for the milk system rinse.
•
Uppermost position
•
Other positions
If the all-in-one spout is still in the milk system rinse position after a milk system rinse, the
20
display reports:
>
Put the all-in-one spout in a beverage dispensing position
As soon as the all-in-one spout is back in a beverage dispensing position, the message disap-
pears and the readiness display appears.
= milk system rinse (spout clicks into position)
= beverage dispensing (variable height)
lower spout
lower spout
into beverage position
into beverage position