Read Counters - WMF 1000 User Manual

Settings
Switch-off time (in minutes after the last beverage preparation)
Here you can set how many minutes after the last beverage preparation the coffee machine
should switch-off automatically.
Brewing temperature
You can set the temperature of the brewing water here.
The default is 92°C.
Factory settings
If you select "yes", all basic settings and all beverage settings are reset to the factory settings.
30

Read counters

You can display the quantities of beverages prepared here.
> Use the plus button to browse through the individual beverages
Example of espresso:
As soon as all beverages have been displayed or the Off/C button has been pressed, the
message appears:
Keep the counters:
> Press the minus button
Delete all counters:
> Press the plus button
sw.-off time: 60 min sw.-off time: 60 min
OK: P change: -/+ OK: P change: -/+
brewing temperature:92°C brewing temperature:92°C
OK: P change: -/+ OK: P change: -/+
factory sett.: No: factory sett.: No:
OK: P change: -/+ OK: P change: -/+
counters counters
OK: P brwse.: -/+ OK: P brwse.: -/+
espresso 269 espresso 269
OK: P brwse.: -/+ OK: P brwse.: -/+
reset all counters reset all counters
No: - No: - Yes:+ Yes:+
Attention!
If timer operation is activated, the
machine switches on again at the set
switch-on time.
Brewing temperature
See
"Tips and tricks" chapter
Attention!
All individual settings are lost if you
reset to the factory settings.