Commissioning
Commissioning
Unpacking and setting up
>
Unpack coffee machine and set it up on a stable, horizontal support
>
Check the coffee machine for possible transport damage
>
Plug the connector into a grounded outlet
>
Insert drip tray and drip tray grid
Test the water hardness
>
Briefly dip carbon hardness test strip into water (approx. 1 second)
>
One minute later, read the degree of hardness on the colour scale of the test strip package
The water hardness is set during commissioning.
Prepare the water tank
>
Remove the water tank from the coffee machine
>
Remove all accessories from the water tank
>
Rinse the water tank thoroughly with tap water
Do not put the water tank back into the machine yet. The milk hose must be assembled first.
8
Insert the WMF water filter
The WMF water filter ensures the best coffee quality and protects the coffee machine against
calcification.
With water hardness 0-, do not use a water filter.
>
Remove the screen built into the water tank
>
Place the cartridge adapter on the water spout supports from above (lock pulled) and lock by
pressing the lock down
>
Unpack the water filter cartridge and place on the cartridge adapter
[1]
[2]
Cable compartment
Fill water tank with drinking
water
[3]