WMF 1000 User Manual page 14

Commissioning
Water hardness
Set the result of the lime hardness test here.
Water filter
Enter here whether you are using a tank filter
(recommended with water hardness 5 °dKH and higher)
If "water filter" is set, then the filter should be rinsed now.
> Set a container with approx. 3 litres capacity under the hot water spout
When rinsing the filter, you will hear unusual noises. This is normal. The noises will end during the
filter rinse.
12
The machine now heats up.
After the machine is heated up, there is a coffee system rinse. This warms up all the pipes.
> Place a container for the rinse water under the all-in-one spout (approx. 200 ml)
A coffee system rinse starts.
The coffee system rinse lasts approx. 0 seconds; after this, the machine is ready to operate.
water hardn.: 13-16 water hardn.: 13-16
OK: P change: -/+ OK: P change: -/+
water filter: No water filter: No
OK: P change: -/+ OK: P change: -/+
place 3l container place 3l container
under h.w. spout under h.w. spout
heating up ... heating up ...
Your selection pls Your selection pls
24.10.2006 24.10.2006 08:15 08:15
Lime hardness test
See included accessories
Rinse filter:
Follow the display texts
See also change filter
in Chapter 6 "Care"
select
confirm
P

Care button
Browse backwards
–
Reduce value
Browse forwards
+
Increase value
The new values are saved
when you exit the program.