Beverage Settings - WMF 1000 User Manual

Settings
> If necessary the new setting can be tested by a dispensing test
The taste and the composition of the beverage remains the same, only the volume
is changed to your wishes and to match the cup size.
> As soon as the cup volume is set as desired, confirm the new value with the

Beverage settings

Here you can adjust the recipes of your coffee specialities according to your personal tastes.
The following settings are available:
• Water volume
• Coffee strength
• *Milk volume
• *Sequence of the dispensing of milk and coffee
• Pre-brew (aroma development)
*Option only available for beverages with milk
26
> Press the P button for approx. 2 seconds

> Use the buttons to scroll through to
+
> Select the beverage setting program by pressing the
cup volume: 100% cup volume: 100%
OK: P OK: P test:bev.btn. test:bev.btn.
select program select program
browse: -/+ browse: -/+
beverage settings beverage settings
OK: P change: -/+ OK: P change: -/+
P button

P button

Technical Data
See
"Technical Data" chapter
select
confirm
P

Care button
Browse backwards
–
Reduce value
Browse forwards
+
Increase value
The new values are saved when you
exit the program.