WMF 1000 PRO User Manual
Hide thumbs Also See for 1000 PRO:
Table of Contents

Advertisement

WMF1000pro
User Manual EN

Advertisement

Table of Contents
loading

Summary of Contents for WMF 1000 PRO

  • Page 1 WMF1000pro User Manual EN...
  • Page 2 WMF has been involved in the preparation of coffee since 1880. The first WMF large coffee machine dates back to 1927. Just 30 years later, in 1955, the great victory campaign of...
  • Page 3: Introduction And General Information

    Introduction and General Information Parts of the machine Bean hopper Manual insert Heated cup storage Display Plus button / Aroma button Hot water button Minus button / Care button / Aroma button P button / Confirm / Preheat cup button Hot water spout Off/C button / Timer Milk hose...
  • Page 4 The WMF 1000 pro offers you a unique range of beverages and access to well‑established technology. You will be impressed by the machine‘s technical design, long service life, and especially by the quality of the coffee it produces.
  • Page 5 Congratulations on choosing your WMF 1000 pro.
  • Page 6: Table Of Contents

    Display timer operation Manual switch-on for timer operation Manual switch-on for timer operation Settings Cup size (Cup volumes) Beverage settings Grinding degree setting Check the grinding degree using the WMF Perfect Extraction System Set the grinding degree Basic settings Read counters...
  • Page 7 Care Care overview General care program Call up the care program Warm-up rinse/Coffee system rinse WMF Connect and Clean milk system rinse Cleaning the machine - Cleaning program Replace water filter Descale coffee machine Manual cleaning Clean the milk system...
  • Page 8: Before You Begin

    Introduction Before you begin Read this user manual before you begin making coffee. Only then can you use all of the functions, operate the machine safely and spoil yourself with a wonderful cup of coffee. Additional components of the user manual: •...
  • Page 9 > Individual activities, individual steps Description of coffee machine state and/or explanations Italics of steps carried out automatically WMF All‑in‑one professional spout Combination coffee spout and milk foamer WMF Connect & Clean Automatic milk system rinse WMF Perfect Extraction system For the perfect grinding degree setting WMF Steam‑Jet...
  • Page 10: Start-Up

    Do not put the water tank back into the machine yet. The milk hose must be assembled first. Insert the WMF water filter The WMF water filter ensures the best coffee quality and protects the coffee machine from calcium deposits.
  • Page 11: Assemble The Milk Hose

    Start‑up program > Unpack the water filter cartridge and place it on the cartridge adapter The sieve and water filter sit very securely. Assemble the milk hose The milk hose is already mounted on the All‑in‑One professional spout. • For refrigerated milk, use the white milk nozzle (assembled on delivery) •...
  • Page 12: Fill The Water Tank

    Start‑up program Fill the water tank > Fill the water tank with cold tap water (max. 2.8 litres) > Slowly slide the water tank back into the machine Fill the water tank only with fresh, cold water. Never use hot water, mineral water, milk or other liquids.
  • Page 13: Start-Up Program

    > Confirm with the P button. initial setup of your WMF 1000 The set values can be changed in The machine is switched on, the start-up program leads you through the basic settings. the “Basic Settings” program after start-up.
  • Page 14 Start‑up program Water hardness water hardn.: 13-16 OK: P change: -/+ > Set the result of the carbonate hardness test here Carbonate hardness test See included accessories Water filter water filter: No OK: P change: -/+ > Enter here whether you are using a tank filter (recommended with water hardness 5 °dKH and higher) If “water filter”...
  • Page 15 Start‑up program Start-up complete You can use the WMF 1000 pro to make coffee just how you like it. There are many settings available for this: • Set cup size • Beverage setting • Grinding degree setting • Basic settings For perfection in your preparation of coffee we have compiled a chapter of “Tips and Tricks”.
  • Page 17: Operation

    Prepare coffee beverages In the centre of the WMF 1000 pro is a multi‑function knob with four beverage buttons. Herein lie all the international coffee specialities that you can imagine. Each of the four buttons is assigned several beverages.
  • Page 18: Example: Prepare Two Glasses Of Latte Macchiato

    Operation Example: Prepare two glasses of latte macchiato Here is a step‑by‑step description of how to prepare two glasses of latte macchiato. This description serves as an example for the preparation of all beverages. All steps are carried out for the preparation of the other beverages according to the example.
  • Page 19: Coffee Preparation Using The Manual Insert

    > “Clean brewing unit” Coffee ground too fine can cause malfunctions. Preparing milk and milk foam At the touch of a button, the WMF 1000 pro also dispenses hot milk and milk foam. Press 1x briefly press and hold 1 cup milk Milk foam on request Milk or milk foam can drip out a bit after dispensing.
  • Page 20: Dispensing Hot Water

    Operation Cup of warm milk > Place an appropriate drinking vessel under the All‑in‑One professional spout > Press the milk button 1x briefly Another press of the milk button ends dispensing prematurely. Milk foam > Place an appropriate drinking vessel under the All‑in‑One professional spout >...
  • Page 21: Wmf All-In-One Professional Spout

    Operation WMF All-In-One professional spout The WMF 1000 pro is fitted with a unique system that has been standard in our professional machines for many years: The All‑in‑One professional spout. It dispenses coffee and milk foam simultaneously, with infinitely variable height adjustment so that you can place anything from an espresso cup to a latte macchiato glass beneath it.
  • Page 22: Control Buttons

    • Introduction to settings • Confirm a selection • Start WMF Steam‑Jet cup preheating (> 2 seconds) Minus button / Aroma button / Care button • Browse back through the programs with minus • Reduce coffee strength for the next beverage •...
  • Page 23: Switching The Coffee Machine On And Off

    Switching on > Press the Off/C button The welcome display appears, then the coffee machine heats up. WELCOME of your WMF 1000 Time from switching on until readiness heating up... state approx. 4 min. > Place a container for the rinse water (approx. 120 ml) under the All‑in‑One professional spout After the machine is heated up, there is a coffee system rinse.
  • Page 24: Switching The Coffee Machine On And Off In Timer Operation

    Operation Switching the coffee machine on and off in timer operation Setting the automatic switch-on time Set automatic switch-on time to active, To use the timer, the basic setting “Automatic switch‑on time” must first be set to active. “Settings” chapter > “Basic Settings” >...
  • Page 26: Settings

    Cup size (Cup volumes) All beverage volumes are matched to the The WMF 1000 pro allows you to make easy individual adjustments to the cup volume to suit the cup WMF Coffee Lounge cups. sizes. The essential point is that: the recipe remains unchanged.
  • Page 27: Beverage Settings

    Settings > If necessary the new setting can be tested by a dispensing test cup volume: 100% OK: P Test:bev.btn. The taste and the composition of the beverage remains the same, only the volume is changed to your wishes and to match the cup size. >...
  • Page 28 Settings 1x brief 1x espresso 1x café crème 1x brief no setting no setting 1x long 1x ristretto 1x mug café crème 1x long 1x brief 1x cappuccino 1x latte macchiato 1x brief no setting no setting Technical Data, 1x long 1x cafe latte 1x espresso macchiato 1x long...
  • Page 29 Settings Amount of foam volume In seconds, only for beverages containing milk foam foam volume: 14 sec. OK: P change: -/+ The foam volume depends on the milk used, the milk temperature and the milk nozzle selected. Determine the desired volume with a dispensing test. Milk volume In seconds, only for beverages with milk milk volume: 16 sec.
  • Page 30: Grinding Degree Setting

    Adjust the grinding degree using the flavour after setting. WMF Perfect Extraction System so that it is optimal for the type of coffee used. Check the grinding degree using the WMF Perfect Extraction System >...
  • Page 31: Set The Grinding Degree

    Settings Grinding degree too coarse Signs: The coffee flows too fast, the crème is too light and has too little body, the aroma is flat. grinding too coarse Set grinding degree, see page 29 Test: end: C > Turn the multitool one rotation clockwise to set the grinding degree finer. Test the new grinding degree setting >...
  • Page 32: Basic Settings

    Settings Basic settings • Language* • Time* • Date* Description of the other • Date/time basic settings, see “Start-up” chapter page 8 • Switch‑on time • Switch‑off time • Water hardness* • Water filter* • Brewing temperature • Factory settings For a description of the basic settings marked with *, see the “Start-up”...
  • Page 33: Read Counters

    Settings Switch-off time (in minutes after the last beverage preparation) Attention! Switch-off time: 60min If timer operation is activated, the OK: P change: -/+ machine switches on again at the set switch-on time. Here you can set how many minutes after the last beverage preparation the coffee machine should switch‑off automatically.
  • Page 35: Care

    Care Care The care of your WMF 1000 pro is very important, not least so that your coffee is always prepared perfectly. The display notifies you as soon as the WMF 1000 pro must be rinsed, cleaned or descaled. The unique WMF Connect and Clean milk system rinse provides you with a very easy to maintain cleaning system for beverages with milk components.
  • Page 36: General Care Program

    WMF assumes no liability for damage due to lack of cleaning or descaling or due to the use of other cleaning or descaling agents than those provided by WMF. All guarantee and warranty claims then lapse.
  • Page 37: Warm-Up Rinse/Coffee System Rinse

    WMF Connect and Clean milk system rinse Milk system rinse time The WMF Connect and Clean milk system rinse is unique world‑wide; it allows you to easily maintain approx. 30 seconds perfectly clean systems for beverages with milk components and thus maintain consistently enjoyable coffee.
  • Page 38: Cleaning The Machine - Cleaning Program

    Care The coffee machine‘s milk system is rinsed with hot water. Hot rinse water is emptied through the All-in-One professional spout. After a successful rinse, the following display appears: your selection pls 08:15 17.10.2007 > Turn the milk hose anticlockwise, disconnecting it from the hot water spout After the rinse, some hot water remains in the milk hose.
  • Page 39 Care place 3L container under spout > Place an appropriate container (min. 3 litres) under the All‑in‑One professional spout insert tablet into coffee grounds slot > Add a cleaning tablet together with the yellow sponge and close the cover Start: care button A cleaning tablet consists of a white >...
  • Page 40: Replace Water Filter

    Care Replace water filter filter exchange OK:P brwse.:care-bt > Confirm with the P button remove water tank remove old filter place new filter > Remove the old filter > Insert a new filter > refill water tank > After the change, confirm with the P button Change water filter see “Start-up”...
  • Page 41: Descale Coffee Machine

    Pull the water tank out of the machine towards the front > Remove the filter cartridge if a water filter is used (important) > Pour a whole bottle of WMF liquid descaling agent (750 ml) into the water tank “Cleaning the milk system” > Fill the water tank with water >...
  • Page 42 The water hardness, the water flow and whether a tank filter is used determine the Immediately after decalcification, you will schedule for descaling. The time will be calculated by the WMF 1000 pro and the be prompted to clean the machine.
  • Page 43: Manual Cleaning

    Care Manual cleaning All parts of the milk system must be cleaned thoroughly at least once a week. Clean the milk system All parts of the milk system must be cleaned thoroughly at least once a week. The milk system consists of: >...
  • Page 44 Care > Stir one measuring cap WMF milk system cleaner into 200 ml lukewarm water in a container > Place all parts of the milk system in the cleaning solution for 5 hours or overnight With the brushes included in the scope >...
  • Page 45: Clean The Brewing Unit

    Care Clean the brewing unit The brewing unit must cool off before cleaning > Switch‑off the coffee machine with the Off/C button, pull the mains connector If the brewer is difficult to remove, the > Open the side doors on the right O-rings must be greased.
  • Page 46 Care > Clean the brewing filter under running water or with a cloth > Rinse the brewing unit under running water Never clean the brewing unit in a dishwasher and never use any cleaner additives. > Dry the brewing unit with a cloth. Allow to dry completely before replacing in the coffee machine >...
  • Page 47: General Cleaning

    Switch off the machine, unplug the power cord > Clean the housing with a damp cloth It is best to clean the stainless steel front and the side parts using the WMF stainless steel cleaning cloth from the specialty shop.
  • Page 48: Tips And Tricks For Perfect Coffee Beverages

    Run a warm‑up rinse on the machine after switching on and Together with the quantity of ground coffee, the grinding degree after pauses in use. This brings the WMF 1000 pro up to its ideal influences the generation of the “body” or “richness” of the coffee, operating temperature.
  • Page 49: Cleaning The Bean Hopper

    Care Coffee contains oils and fats which become deposited on the The care of the WMF 1000 pro is particularly important for surfaces of the hopper. In the presence of oxygen, these oils perfectly prepared coffee. Therefore run the appropriate care oxidise and seriously affect the taste of the coffee.
  • Page 51: Twelve International Specialties At The Press Of A Button

    Tips and tricks Twelve international specialties at the press of a button Espresso Two espressos Ristretto The little black coffee with the “Due espressi”! The Italian way of Small, black and powerful ‑ the strong aroma. Cognoscenti prize the enjoying coffee ‑ best with a friend. Or you concentrated version with characteristic crème.
  • Page 52: Messages And Tips

    Messages and Tips Messages and Tips Operating messages Empty coffee grounds container The coffee grounds container is full empty grounds cont. > Remove the coffee grounds container, empty it and rinse it with water beverage sel. locked > Wipe the coffee grounds container dry grounds cont.missing >...
  • Page 53: Bean Hopper Is Empty

    Messages and Tips Bean hopper is empty There are not enough coffee beans in the refill beans coffee bean hopper confirm beverage Grinding is interrupted > Pour coffee beans into the bean hopper > Press the beverage button again The grinding process continues and the additional coffee required for the brewing cycle is ground The selected beverage is then brewed.
  • Page 54: Side Door Open

    Messages and Tips Side door open The right-hand side door of the coffee beverage sel. locked machine is open side door open > Close the right‑hand side door > Close lock completely Grinding degree too fine? / Brewing unit stopped up? Find the cause: grinding too fine? The dispensing stream is interrupted,...
  • Page 55: Error Messages And Malfunctions

    Search in the error list for the error message and follow the instructions. If this is not successful or the error displayed is not listed, please call the WMF service hotline! Some messages lead to blocking of individual functions. You will notice this by the fact that the beverage button light goes out.
  • Page 56: Problems With No Error Display

    EEPROM Error Switch machine on/off If the error repeats, the malfunction must be remedied by the WMF Service Center. “WMF Service Center” chapter > Motor driver error Switch machine on/off If the error repeats, the malfunction must be eliminated by the WMF Service Center.
  • Page 57 Check all connections and seals of the All‑in‑One professional spout > Water tank stiff Lightly smear O‑rings on water spout supports with WMF gasket grease > Brewing unit is difficult Lightly smear O‑rings on the brewer with WMF gasket grease to remove and replace “Grease O-rings”, page 56...
  • Page 58 Messages and Tips Grease O-rings Use only WMF gasket grease. The grease is specially matched to the material and safe for food preparation equipment. If the water tank is difficult to remove and replace. O‑ring for water tank > Spout support Lightly smear O‑rings on water spout supports with WMF...
  • Page 59: Safety

    Safety Safety Safety instructions At WMF, we pay utmost attention to the product features, to ensure the machine is as safe as possible. The effectiveness of the built‑in safety devices is, however, only guaranteed if the following points are observed: •...
  • Page 60: Hazard Instructions

    Plastic parts of the coffee machine, with the exception of the water tank, may not come into contact with the descaling agent. • Take care that no adjacent objects and textiles, etc. come into contact with the descaling agent. • Use only WMF cleaning and descaling media.
  • Page 61: Correct Use

    WMF assumes no liability for damage due to lack of cleaning or descaling or due to the use of other cleaning or descaling agents than those provided by WMF. All guarantee and warranty claims are then void. The WMF 1000 pro coffee machine must be used exclusively for preparation of coffee/espresso, milk and hot water.
  • Page 62: 24-Month Premium Service And Maintenance

    WMF Service Center This procedure applies only within Have a question on the operation or function of your WMF 1000 pro? Call us on our WMF Service Germany and Austria. Hotline. Or send us an e‑mail. The WMF Service Center is the first point of contact, along with your specialist dealer.
  • Page 63: Wmf 1000 Pro Service Ticket

    Don‘t forget to include the completed service ticket and a copy of the proof of purchase in your package. Attention: Handling of shipping of your WMF 1000 pro occurs via the WMF Service Center. The package is collected from your premises.
  • Page 65: Transport And Disposal Of The Coffee Machine

    This device is subject to the directive on waste electrical and electronic equipment (WEEE/EU directive) and may not be disposed of as domestic waste. Further information can be obtained from your local recycling depot or from our WMF Service Center. ”WMF Service Center”, page 60...
  • Page 66: Accessories And Spare Parts

    Therefore we have developed the right matching accessories for your WMF 1000 pro. As well as the Coffee Lounge milk chiller with active milk refrigeration you will receive everything that makes for perfect enjoyment of coffee. Ask your...
  • Page 67: Technical Data

    200 mm space on the right side of the machine to dismantle the brewer. Weight empty approx. 19,0 kg Weight of brewer 1,2 kg Cable length approx. 1,0 m Continuous sound pressure level (Lpa) < 70 dB (A) Item number 03 0510 0001 Manufacturer WMF Group...
  • Page 68: Index

    Hygiene 47 Cup volume 24 All‑In‑One spout 19 Amount of foam volume 27 Assemble the milk hose 9 Insert the WMF water filter 8 Date 11, 30 Automatic switch‑on time 22, 30 International specialties 49 Date/Time 30 Introduction to settings 20...
  • Page 69 Switch coffee machine on 21 Water volume 26 Switching off 20, 22 White symbols 20 Switching on 21 WMF 1000 service ticket 61 Quick reference 64 Switch on the coffee machine 10 WMF Service Hotline 60 WMF Steam‑Jet 19 WMF 1000 Service Center 60...
  • Page 70 Introduction WMF1000pro Type 0510 BAL 10/08 ‑ EN...

Table of Contents