Example: Prepare A Mug Of Cappuccino; Special Feature For Café Latte; Setting Coffee Strength For The Next Beverage - WMF 1000 User Manual

Operation

Example: Prepare a mug of cappuccino

A step-by-step description of how to prepare a mug of cappuccino follows. This description
serves as an example for the preparation of all beverages. All steps are carried out for the
preparation of the other beverages according to the example.
> If necessary, adjust the height of the all-in-one spout to the height of the drinking vessel.
> Place an appropriate drinking vessel under the all-in-one spout
> Press the beverage button for the mug of cappuccino twice briefly
See overview of beverage buttons
The beverage button pressed lights up white.
The display indicates:
Depending on the setting, the coffee beans are ground appropriately for the selected beverage.
The preparation occurs as specified in the beverage settings.
The beverage is prepared and dispensed into the drinking vessel underneath the spout.
The readiness display indicates:
Special feature for café latte
16
> Select café latte by pressing 1 x long (see overview of beverage buttons)
Before preparing café latte:
> Press the milk lever to the left of the all-in-one spout downwards
> Confirm that the milk lever is moved downwards by pressing the lighted beverage button
Beverage preparation begins.
After preparing café latte:
> Move the milk lever upwards
> Confirm with button

Setting coffee strength for the next beverage

Before each coffee preparation, you can decide how strong you want the next coffee beverage
to be.
1x mug cappuccino 1x mug cappuccino
Your selection pls Your selection pls
24.10.2006 24.10.2006 08:15 08:15
1x café latte 1x café latte
milk lever down milk lever down
milk lever up milk lever up
P

Set the height of the all-in-one spout
See
Page 20
Coffee preparation using the manual
insert
See
Page 17
Preparing milk and milk foam
See
Page 18
See
Preparing milk and milk foam
Page 18