WMF 1000 User Manual page 29

> Select the beverage for which the taste and composition should be changed
1x brief 1x espresso
2x brief no setting
1x long 1x ristretto
1x brief 1x cappuccino
2x brief no setting
1x long 1x cafe latte
For "2x brief" beverages, no setting is necessary, the beverage settings always
correspond to twice the quantities for a "1x brief" beverage.
Water volume
> Example: press the plus button until the water volume is increased to 37 ml
You can start a preparation test with the new values at any time.
> Place an appropriate drinking vessel under the all-in-one spout
> Press the beverage button again
> The beverage is dispensed
> If the beverage is to your taste, confi rm the settings by pressing the
water volume: 35ml water volume: 35ml
OK: P change: -/+ OK: P change: -/+
water volume: 37ml water volume: 37ml
OK: P OK: P Test:bev.btn. Test:bev.btn.
water volume: 37ml water volume: 37ml
OK: P change: -/+ OK: P change: -/+
1x café crème 1x brief
no setting 2x brief
1x mug café crème 1x long
1x latte macchiato 1x brief
no setting
1x espresso macchiato 1x long
P button

Settings
27