Operation
Switching on and off
Switching on
>
Press the Off/C button
The greeting display appears, then the coffee machine heats up.
>
Place a container for the rinse water under the all-in-one spout (approx. 200 ml)
After the machine is heated up, there is a coffee system rinse. This rinse warms up all the pipes.
The coffee system rinse lasts approx. 40 seconds; after this, the machine is ready to operate.
The readiness state display appears.
22
Switching off
>
Press the Off/C button for approx. 2 seconds
>
Place a container for the rinse water under the all-in-one spout (approx. 200 ml)
If beverages with milk (such as café latte) were prepared, then you will be asked to perform a milk
system rinse.
A coffee system rinse begins after that. Follow the display texts. The machine switches off.
WELCOME
WELCOME
WMF 1000
WMF 1000
heating up ...
heating up ...
Your selection pls
Your selection pls
24.10.2006
24.10.2006
08:15
08:15
Time from switching on until readiness
state approx. 2 min.
Milk system rinse
See
"Care" chapter
> Care programs