What's New In This Version; New Features And Improvements - Cisco TelePresence SX10 Reference Manual

Cisco TelePresence SX10

Introduction Introduction

What's new in this version

This section provides an overview of the new and
changed system settings, and the new features and
improvements in the Cisco Collaboration Endpoint
software version 8.0 (CE8.0) compared to TC7.3.
As CE software is based on TC7, the structure and main
functionality remains the same as in TC software.
For more details, we recommend reading the Software
release notes:
 http://www.cisco.com/c/en/us/support/collab-
oration-endpoints/telepresence-quick-set-series/
tsd-products-support-series-home.html
It is important to consider the upgrade
requirements of CE8 before upgrading; other-
wise upgrading to CE8 can leave you with a
non-functioning deployment that requires you to
downgrade.
Cisco TelePresence SX10 API Reference Guide CE8.2, SEPTEMBER 2016.
D15333.07
About the API xConfiguration

New features and improvements

Products
CE8.0 supports the following products:
• MX200 G2
• MX300 G2
• MX700
• MX800
• SX10 Quick Set
• SX20 Quick Set
• SX80
Cisco TelePresence products in EX Series, C Series,
and Profile Series are not supported in CE software; use
software version TC7.3 or earlier for these products.
User interfaces
Products running CE software, must use the following user
interfaces:
• Touch 10 controller, available for all products.
• TRC6 remote control, available for SX10 and SX20.
Touch 8 controller and remote control TRC5 are not
supported.
API changes
The number of API commands has been reduced. Some
commands have been removed entirely while others are
different syntactically to cater for underlying architectural
changes.
It is important to consider that current integrations that use
the API are likely to need to be reprogrammed in order to
work with the new API.
The full list of the changes, as well as a list of new
commands are available in this chapter.
xCommand
Intelligent Proximity for content sharing
Cisco Proximity allows you to automatically pair your device
(smartphone, tablet, or laptop) with the video system when
the device comes within range. This feature is disabled by
default.
Cisco Proximity offers three services: Content sharing to
clients, content sharing from clients and basic call control.
These services are disabled by default.
The Cisco Proximity clients for smartphones and tablets
(Android and iOS), and laptops (Windows and OS X) can be
downloaded from
smartphones and tablets are also available through Google
Play (Android) and Apple App Store (iOS).
Microphone LED behavior
The LED behavior on microphones and Touch 10 has
changed. The microphone LED glows and the mute button
is active in the following scenarios:
•
•
•
The color indications, green for active and red for muted,
have not changed.
PIN code protection
The on-screen Advanced Settings menu can be PIN code
protected to prevent unauthorized users from changing the
configuration of the video system.
17
API Reference Guide
xStatus Appendices
 http://proximity.cisco.com.
When initiating an outgoing call and until the call is
disconnected.
When receiving an incoming call and until the call is
disconnected.
When activating the VU meter on the web interface to
test the audio levels.
Copyright © 2016 Cisco Systems, Inc. All rights reserved.
Clients for