What's New In This Version - Cisco Service Manual Service Manual

Cisco TelePresence SX20 Quick Set
Contents

What's new in this version

This section provides an overview of the new and changed
system settings and new features in the TC6.0 software
version.
Software release notes
For a complete overview of the news and changes, we
recommend reading the Software Release Notes (TC6). Go
to:
► http://www.cisco.com/en/US/products/ps11424/tsd_
products_support_series_home.html
Software download
For software download go to:
► http://www.cisco.com/cisco/software/navigator.html
D14908.02 SX20 Administrator Guide TC6.0, JANUARY 2013.
Introduction Introduction Web interface
New features and improvements
Administrator password not set warning on OSD
If the administrator password is not set, there is an on screen
warning in the lower right corner indicating this. The warning
disappears when the password is set.
Improved video layout
• Improved local layout control when using the
Touch controller
You can easily choose between the layout options using
the Touch controller. Each option is illustrated by an icon
reflecting the actual layout.
You can choose between the predefined layout options
as well as any custom layouts that have been created for
this TelePresence system (for example created with the
TC Console application).
• Picture-in-Picture support
There is support for showing Picture-in-Picture (PIP), for
example showing a full screen presentation with both
remote video and self view as PIP.
The PIPs can be moved to predefined drop zones,
typically upper right, upper left, lower right etc. When
using a Touch controller you can see the drop zones as
you start moving the PIP.
• Changing the video layout on remote sites
When you are hosting a MultiSite conference, you can
change the video layout sent to remote sites.
• Lock Speaker function in MultiSite conferences
When you are hosting a MultiSite conference, you can
use Lock speaker to keep the large picture for the same
participant for the entirety of the call (no audio-driven
switching between participants).
System settings
• Full screen self view
Support for Cisco TelePresence ISDN Link
You can pair a TelePresence system with a Cisco
TelePresence ISDN Link. As from software versions TC6.0
and IL1.1 automatic pairing mode is supported.
When making a call via ISDN Link, choose H320 (ISDN) as the
call protocol.
Secure communication in a CUCM environment
As from version TC5 endpoints running TC software can
register to a Cisco Unified Communications Manager (CUCM)
version 8.6.2 or newer. In TC6.0 this feature is extended to
also include secure (encrypted) connections. The encryption
indicator is shown on the screen during a call.
This feature requires that security mode is installed and
configured on CUCM. Read the Administering TC Endpoints
on CUCM 9.0 guide to find how to set up this feature.
Support for SIP URI dialing when registered to CUCM
As from Cisco Unified Communications Manager (CUCM)
version 9.0, endpoints registered to CUCM support URI
dialing. A URI is an alias for a directory number (DN). A call
to the URI behaves as if the call was made directly to the
directory number.
URI example: conference_room@company.com. The user
name (left side) is case sensitive in CUCM 9.0, while the
domain (right side) is not.
www.cisco.com — Copyright © 2012-2013 Cisco Systems, Inc. All rights reserved.
6
Administrator Guide
Setting passwords Appendices
Full screen self view while in call is supported on dual
monitor systems.