8900-G48X-Xl I/O Module; I/O Module Leds - Extreme Networks BlackDiamond 8806 Hardware Installation Manual

BlackDiamond 8000 Series Modules

8900-G48X-xl I/O Module

The 8900-G48X-xl I/O module
Figure 32: 8900-G48X-xl I/O Module
o d u l e s t a t u s L E D s
In the default configuration of the 8900-G48X-xl I/O module, all ports:
Are added to the default VLAN as untagged
●
Inherit the properties of the default VLAN (for example, protocol type and VLANid)
●
The 8900-G48X-xl I/O module has the following LEDs:
Module status
●
Module diagnostics
●
Port status
●
For information about the LEDs and their activity on the 8900-G48X-xl I/O module, see
LEDs" on page

I/O Module LEDs

This section describes the LEDs for the module, the port, and inline power delivery status for I/O
modules in the BlackDiamond 8800 series of switches.
NOTE
Inline power delivery applies only to the ports on the G48P and G48Pe I/O modules or to a G48tc, G48Te2, or
8500-G48T-e I/O module with an installed S-POE card.
50
(Figure 32) has 48 unpopulated SFP-based 1-gigabit Ethernet ports.
1 0 0 0 B A S E - X
p o r t s
50.
B D _ 2 8 1
BlackDiamond 8800 Series Switches Hardware Installation Guide
"I/O Module