Using The Summitstack-V80 Stacking Module Or Vim2-Summitstack-V80 Module - Extreme Networks Summit X150-24t Hardware Installation Manual

Confidential and proprietary information of Extreme Networks. © 2011 Extreme Networks, Inc.
Building a SummitStack Configuration
Table 57: Recommended Order for Stacking Connections (5-Switch Stack)
Connect this slot and port . . .
Slot 1 Stack Port 2
Slot 2 Stack Port 2
Slot 3 Stack Port 2
Slot 4 Stack Port 2
Slot 5 Stack Port 2
Using the SummitStack-V80 Stacking Module or
VIM2-SummitStack-V80 Module
The SummitStack-V80 stacking module and VIM2-SummitStack-V80 module allow you to use active or
passive direct-attach QSFP+ cables to connect stack members across rows in a data center. In
passive copper cables are used to connect adjacent switches in the same rack, and the active fiber cables
provide connections up to 100 meters long between racks. The illustration shows Summit X460 series
switches; Summit X480 series switches could be used in the same way.
Figure 113: Using the SummitStack-V80 Stacking Module or VIM2-SummitStack-V80 Module
166
All rights reserved. DRAFT. October 20, 2011
. . . To this slot and port
Slot 2 Stack Port 1
Slot 3 Stack Port 1
Slot 4 Stack Port 1
Slot 5 Stack Port 1
Slot 1 Stack Port 1
SH_226
Summit Family Switches Hardware Installation Guide
Figure 113,