Extreme Networks BlackDiamond 8806 Hardware Installation Manual page 94

Installing the BlackDiamond 8800 Series Chassis
To ground the chassis:
1 Locate the grounding point on the back of the chassis
Figure 58: Back of BlackDiamond 8806 Chassis
Grounding point
Figure 59: Back of BlackDiamond 8810 Chassis
Grounding point
2 Strip 0.5-inch (1.2-cm) of insulation from the stranded copper wire cable.
3 Insert the stripped wire into the cable lug.
94
(Figure 58 and Figure
PSU / fan
controllers
BlackDiamond 8800 Series Switches Hardware Installation Guide
59).
EX_128A
PSU/Fan
controllers
ASP044A