Extreme Networks BlackDiamond 8806 Hardware Installation Manual page 86

Installing the BlackDiamond 8800 Series Chassis
Figure 49: Removing Contents from the BlackDiamond 8810 Upper Shipping Carton
3 Release the clip locks as shown in
a Place your thumb and index finger inside the clip lock to grasp the prongs.
b Squeeze the prongs inward applying equal pressure on each side.
c Pull the prongs outward until the clip lock is released from the carton.
Repeat these steps to release each remaining clip lock.
Figure 50: Clip Locks on the BlackDiamond 8810 Shipping Carton
Clip lock
4 Lift the BlackDiamond 8810 shipping carton up and off the chassis (see
5 Remove all four restraining bolts that hold the BlackDiamond 8810 chassis to the shipping brackets
on the shipping pallet (see
86
ASP024
Figure
Squeeze prongs
to unlock
Figure 51).
45.
Open
lock
EX_087B
BlackDiamond 8800 Series Switches Hardware Installation Guide
Figure 51).