Port Leds On Poe Modules (G48P, G48Pe, And G48Tc, G48Te2, Or 8500-G48T-E Or 8900-G48T-Xl With S-Poe Card) - Extreme Networks BlackDiamond 8806 Hardware Installation Manual

BlackDiamond 8000 Series Modules
NOTE
Table 11 describes port LED activity for the G48Tc, G48Te2, 8500-G48T-e, and 8900-G48T-xl modules without an
installed S-POE card. When these modules have an S-POE card installed, the port LEDs operate as described in
Table 12.
Port LEDs on PoE Modules (G48P, G48Pe, and G48Tc, G48Te2, or 8500-G48T-e or
8900-G48T-xl with S-POE Card)
This section describes the port LEDs for BlackDiamond 8000 series I/O modules that support PoE.
These include the following modules:
G48P I/O module
●
G48Pe I/O module
●
G48Tc I/O module with an installed S-POE card
●
G48Te2 I/O module with an installed S-POE card
●
8500-G48T-e I/O module with an installed S-POE card
●
8900-G48T-xl I/O module with an installed S-POE card
●
Port LEDs on these modules indicate the status of the inline power delivered through the ports.
Table 12 describes the LED meanings for each port on the PoE-capable I/O modules.
Table 12: Port LEDs for the PoE-capable I/O Modules
LED
Port with
power enabled
Port with
power disabled
52
Color and State Meaning
Solid amber Link up
Amber blinking Activity
Slow amber blinking Port disabled
or
Link down
Blinking amber/green Power fault or insufficient power
Solid green Link up
Slow green blinking Port disabled
Green blinking Activity
Off Link down
Blinking amber/green Power fault or insufficient power
BlackDiamond 8800 Series Switches Hardware Installation Guide