10G8Xc I/O Module - Extreme Networks BlackDiamond 8806 Hardware Installation Manual

10G8Xc I/O Module

The 10G8Xc I/O module
module is over-subscribed 2:1.
Figure 22: 10G8Xc I/O Module
Module status LEDs
10GBASE-X XFP
In the default configuration of the 10G8Xc I/O module, all ports:
Are added to the default VLAN as untagged
●
Inherit the properties of the default VLAN (for example, protocol type and VLANid)
●
The 10G8Xc I/O module has the following LEDs:
Module status
●
Module diagnostics
●
Port status
●
For information about the LEDs and their activity on the 10G8Xc I/O module, see
on page 50.
BlackDiamond 8800 Series Switches Hardware Installation Guide
Figure 22 has eight unpopulated XFP-based 10-gigabit Ethernet ports. This
10 Gbs ports
10G8Xc 10G8Xc 41615
BD_155
"I/O Module LEDs"
39