Module Leds; Port Leds On Non-Poe Modules - Extreme Networks BlackDiamond 8806 Hardware Installation Manual

Module LEDs

Table 10 describes the LED activity for all I/O modules that are installed in BlackDiamond 8800 series
switches.
Table 10: LED Meanings in I/O Modules for BlackDiamond 8800 Series Switches
LED Color
PoE
Present
Status Green blinking
Amber blinking
Off
DIAG Off
Amber blinking
Amber

Port LEDs on Non-PoE Modules

This section describes the port LEDs for non-PoE BlackDiamond 8000 series I/O modules and for port
option cards installed in the MSM-8c. These include the following modules and option cards:
G24X
●
G48T
●
10G4X
●
G48Ta
●
G48Xa
●
10G4Xa
●
10G4Ca
●
G48Tc (without S-POE card)
●
G24Xc
●
G48Xc
●
10G4Xc
●
Table 11 describes the LED meanings for each port on the non-PoE BlackDiamond 8000 series I/O
modules and the port option cards for the MSM-8c.
Table 11: Port LEDs for the BlackDiamond 8000 Series Non-PoE I/O Modules and Port Option Cards
LED Color
Port Solid green
Slow green blinking
Amber blinking
Off
BlackDiamond 8800 Series Switches Hardware Installation Guide
Indicates
The optional PoE card is installed on the module.
This LED is present only on the G48Tc, G48Te2, 8500-G48T-e, and
8900-G48T-xl modules.
Normal operation
Configuration error, code version error, diagnostic failure, or other severe
module error
No power
Normal operation
Diagnostics in progress
Diagnostic failure
10G8Xc
●
G48Te
●
G48Te2 (without S-POE card)
●
8500-G24X-e
●
8500-G48T-e (without S-POE card)
●
8900-10G24X-c
●
8900-G96T-c
●
8900-G48T-xl (without S-POE card)
●
S-10G1Xc option card
●
S-G8Xc option card
●
Indicates
Link up
Port disabled
Activity
Link down
51