10G4Xa I/O Module - Extreme Networks BlackDiamond 8806 Hardware Installation Manual

10G4Xa I/O Module

The 10G4Xa I/O module
Figure 18: 10G4Xa I/O Module
10GBASE-X XFP
Module status LEDs
In the default configuration of the 10G4Xa I/O module, all ports:
Are added to the default VLAN as untagged
●
Inherit the properties of the default VLAN (for example, protocol type and VLANid)
●
The 10G4Xa I/O module has the following LEDs:
Module status
●
Module diagnostics
●
Port status
●
For information about the LEDs and their activity on the 10G4Xa I/O module, see
on page 50. For information about the XFP interfaces, see the Extreme Networks Pluggable Interface
Modules Installation Guide.
BlackDiamond 8800 Series Switches Hardware Installation Guide
(Figure 18) has four XFP-based 10-gigabit Ethernet ports.
10 Gbs ports
10G4Xa 10G4Xa
41612
BD_155
"I/O Module LEDs"
35