Scan Speed - Icom IC-F8100 Instruction Manual

Additional Menu items
Page 35
After the 'Scan Auto Start' item

Scan Speed

This item sets the scan speed for the All Memory
scan to HIGH, MID or LOW.
Page 37
After the 'ALE Scan Group' item
ALE Scan Speed
This item sets the scan speed for the ALE and Call
scans to HIGH, MID or LOW.
■ About modifications
Page 5
■ LCD screen
e OPERATING MODE INDICATOR
Shows the selected operating mode.
• "LSB," "USB," "CW," "AM," "D1,"* "D2"* or "D3"*
appears, depending on the operating mode.
*When the "Modem" setting (p. 32) in the Admin Menu
is set to "OFF," "RTTY" appears instead.
The D1, D2 or D3 mode can be set in the
"Data mode 1," "Data mode 2" or "Data mode 3" set-
tings (p. 32) in the Admin Menu.
Page 8
■ Mode selection
The following modes are selectable in the IC-F8100:
the LSB, USB, CW, AM, D1,* D2* and D3* modes.
*When the "Modem" setting (p. 32) in the Admin Menu is
set to "OFF," "RTTY" can be selected instead.
The D1, D2 or D3 mode can be set in the "Data mode 1,"
"Data mode 2" or "Data mode 3" settings (p. 32) in the
Admin Menu.
(default: HIGH)
(default: HIGH)
■ About corrections
Page 35
Scan Auto Start
<Incorrect>
This item sets the scan resume timer 1 minute to 10
minutes or OFF for Selcall or ALE.
<Correct>
This item sets the scan resume timer 1 minute to 10
minutes or OFF for all scan types.
Selcall Silent
<Incorrect>
When ON is selected, the transceiver automatically
answers back if your station ID is called.
<Correct>
When OFF is selected, the transceiver automatically
answers back if your station ID is called.
Page 54
OPC-2142
shielded control cable
OPC-2151
shielded control cable
<Incorrect>
OPC-2141: 4 pin, OPC-2151: 6 pin
<Correct>
OPC-2142: 4 pin, OPC-2151: 6 pin
A-6916W-2EX