Selective Call - Icom IC-F8100 Instruction Manual

ï Selective call
The Selcall allows you to make an individual or group
call. Each transceiver is assigned an individual ID
(identification) and can be called using this ID.
• Preparation for Selective call
Sending a Channel Test call on several Selcall chan-
nels, and check the propagation on each channel to
select the channel of good signal quality. (p. 24)
• Sending Selective call
q On the Memory Channel display, push [
enter the Call select menu.
w Push [t](§) or [u](§§§) to select the Call to "SEL-
CALL," then push [
e Push [t](§) or [u](§§§) to select the Call type to
"SELECTIVE."
• "SELECTIVE," "PHONE," "MESSAGE," "SEND POSI-
TION," "GET POSITION," "GET STATUS," "EMERGENCY"
and "CHANNEL TEST" are selectable.
r Push [ ] to forward to the next screen.
• Push [HOME] to return to the previous screen.
❍ Call ID input
Push numeral keys to enter the Call ID.
• Push [8] to delete the number.
• This Call ID is not stored in the Call ID list.
❍ Call ID selection
➥ Push [List](§ § ) to call the list selection
mode.
➥ Push [t](§) or [u](§§§) to select the Call ID.
• Push [Edit](§§) to return to the direct input mode.
t Push [ ] to forward to the next screen.
• Push [HOME] to return to the previous screen.
❍ Network selection
Push [t](§) or [u](§§§) to select the Network.
] to
] to enter the Selcall menu.
SELCALL/ALE OPERATION
y Push [ ] to forward to the next screen.
• Push [HOME] to return to the previous screen.
❍ Self ID selection
Push [t](§) or [u](§§§) to select the Self ID.
❍ Self ID input
➥ Push [Edit](§§) to call the direct input mode.
➥ Push numeral keys to enter the Self ID.
• Push [8] to delete the number.
• This Self ID is overwritten or stored in the Self ID list.
• Push [List](§§) to return to the list selection mode.
u Push [ ] to enter the Channel Menu, and then
push [t](§) or [u](§§§) to select the desired oper-
ating channel.
• Push [HOME] to return to the Selcall menu.
i Push [ ] to transmit the Selective call. The call is
stored in the Call Out memory.
• While calling, push [PTT] to cancel the call.
You can also transmit the Selective call on the Sel-
call Address display. In this case, you can skip
above steps q to t, after selecting the Selective
call address.
• Receiving Selective call
When a transceiver receives a Selective call with your
individual ID, it automatically responds by transmitting.
The receiving Selcall is stored in the Call In memory.
q After receiving a Selective call, and push any key
to enter the Call In memory.
w Push [More](§§§) or [Prev](§) to select the infor-
mation.
e Push [Home] to return to the normal operating
mode.
4
4
17