Speech Processor - Icom IC-F8100 Instruction Manual

ï Checking the MIC level
The transceiver has the MIC level meter. You can
check the MIC level before or after adjusting the Mi-
crophone gain.
[�] [Default] [�]
ï Speech Processor
IC-F8100 has a built-in, low distortion Speech Pro-
cessor circuit. This circuit increases your average talk
power in SSB mode and is especially useful when
the receiving station is having difficulty copying your
signal.
[�] [Default] [�]
/
/
RECEIVE AND TRANSMIT
q Hold down [MENU](HOME) for 1 second to enter
the Menu screen.
w Push [r] or [s] to select the "Admin Menu," and
then push [4].
e Push [r] or [s] to select "Meter Type."
r Push [u](§§§) to select "MIC LEVEL."
t Push [MENU](HOME) twice to return to the nor-
mal operating mode.
y Push [PTT] (microphone) to transmit.
• Speak into the microphone at your normal voice level.
u While speaking into the microphone, check the TX
meter reading.
q Hold down [MENU](HOME) for 1 second to enter
the Menu screen.
w Push [r] or [s] to select the "User Menu," and
then push [4].
e Push [r] or [s] to select "Speech Processor."
r Push [t](§) or [u](§§§) to turn the Speech proces-
sor function ON or OFF.
• Hold down [Default](§§) for 1 second to return to the
default setting.
t Push [MENU](HOME) twice to return to the nor-
mal operating mode.
y Push [Mode](§§) one or more times to select the
USB or LSB mode.
u Hold down [PTT] on the microphone, and speak
into the microphone at a normal voice level.
3
3
11