Noise Blanker - Icom IC-F8100 Instruction Manual

5
MENU SCREEN
D User Menu items (Continued)

Noise Blanker

This item turns the noise blanker function ON or
OFF.
The Noise Blanker function eliminates pulse-type
noise such as car ignitions.
Blanker Level*
This item appears when "Advanced User Menu" of
the Admin Menu is set to ON.
This item adjusts the Noise blanker level from 0 to 15
in 1 steps.
The set level is effective when the Noise Blanker is
activated.
AGC*
This item appears when "Advanced User Menu" of
the Admin Menu is set to ON.
This item selects the Automatic gain control settings
from FAST, SLOW or AUTO.
Bandwidth*
This item appears when "Advanced User Menu" of
the Admin Menu is set to ON.
This item selects the IF filter passband width from
NARROW, MID and WIDE.
Clarifier*
This item appears when "Advanced User Menu" of
the Admin Menu is set to ON.
This item selects the Clarifier function capability ON
or OFF.
When this setting is ON, push [CLAR](7) to turn the
Clarifier function on the Memory Channel display.
Pre Amp*
This item appears when "Advanced User Menu" of
the Admin Menu is set to ON.
This item sets the receiver Preamplifier function ON
or OFF.
When receiving week signal, turn ON this item.
* When the Advanced User Menu in the Admin Menu is set to OFF, these items are not displayed. In this case, only the LCD
Contrast, LCD Dimmer, Backlight, BEEP Level, Squelch Level, Noise Blanker, RF Power and Mic Gain can be adjusted the
value or set the setting.
30
(default: OFF)
(default: 10)
(default: AUTO)
(default: WIDE)
(default: OFF)
(default: ON)