Ale Call - Icom IC-F8100 Instruction Manual

ï ALE call
Automatically establish a communication link by using
the ALE table.
• Sending Individual call
q On the Memory Channel display, push [
enter the Call select menu.
w Push [t](§) or [u](§§§) to select the Call to "ALE,"
then push [ ] to enter the ALE menu.
e Push [t](§) or [u](§§§) to select the Call type to
"INDIVIDUAL."
• "INDIVIDUAL," "NET," "SOUNDING" and "AMD" are se-
lectable.
r Push [ ] to forward to the next screen.
• Push [HOME] to return to the previous screen.
❍ ALE ID selection
Push [t](§) or [u](§§§) to select the ALE ID.
t Push [ ] to forward to the next screen.
• Push [HOME] to return to the previous screen.
❍ Self ID selection
Push [t](§) or [u](§§§) to select the Self ID.
y Push [ ] to enter the Channel Menu, and then
push [t](§) or [u](§§§) to select the desired oper-
ating channel.
• Push [HOME] to return to the ALE Menu.
• When <Auto> is selected, the transceiver automatically
selects the best quality channel in order using LQA
table.
u Push [ ] to transmit the Individual call. The call is
stored in the Call Out memory.
• While calling, push [PTT] to cancel the call.
You can also transmit the Individual call on the
] to
ALE ID display. In this case, you can skip the Call
selection.
• After ALE call
q After ALE call is finished, push any key to enter the
Call menu.
• While linking the ALE call, "TERMINATION" appears.
w Push [ ] to transmit the disconnect call.
• Until 'TERMINATION' is transmitted, the channel can-
not be changed.
• Sending Net call
q Select the Call to "ALE," same operation as Send-
ing Individual call's steps q and w at left.
w Push [t](§) or [u](§§§) to select the Call type to
"NET."
• "INDIVIDUAL," "NET," "SOUNDING" and "AMD" are se-
lectable.
e Push [ ] to forward to the next screen.
• Push [HOME] to return to the previous screen.
❍ ALE ID selection
Push [t](§) or [u](§§§) to select the ALE ID for
Net call.
r Select the Self ID and Operating channel, same
operation as Sending Individual call's steps t and
y at left.
t Push [ ] to transmit the Net call. The call is
stored in the Call Out memory.
• While calling, push [PTT] to cancel the call.
You can also transmit the Net call on the ALE ID
display. In this case, you can skip the Call selec-
tion.
SELCALL/ALE OPERATION
4
4
25