Scan Resume - Icom IC-F8100 Instruction Manual

Scan
This item sets the scan type to ALE, SELCALL,
VOICE, CALL, ALL MEMORY or OFF. (default: OFF)

Scan Resume

This item sets the scan resume ON or OFF.
When this setting is ON, scan pauses for 10 seconds,
then resumes, or resumes after 2 seconds when the
signal disappears.
Scan Auto Start
This item sets the scan resume timer 1 minute to 10
minutes or OFF for all scan.
When this setting is ON, scan pauses for setting time
period after last transmitting, then resumes.
Selcall Silent
This item sets the automatic answer back function for
the Selcall.
When OFF is selected, the transceiver automatically
answers back if your station ID is called.
Selcall Time Out
This item sets the waiting time for the Selcall answer
back while calling.
If you are calling a specific station, but no answer is
coming, then transceiver cancels for waiting the an-
swer back after this time period.
Selective Mode
This item selects the activation of Selcall on both re-
ception and transmission, reception only, transmis-
sion only or disable.
Channel Test Mode
This item selects the activation of Channel Test call
on both reception and transmission, reception only,
transmission only or disable.
(default: OFF)
(default: OFF)
(default: OFF)
(default: 60 seconds)
(default: RX&TX)
(default: RX&TX)
5
MENU SCREEN
5
35