Icom IC-F8100 Instruction Manual page 22

4
SELCALL/ALE OPERATION
ï Phone call
Allows you to make a Phone call through a telephone
interconnect service provider.
• Preparation for Phone call
Sending a Channel Test call on several Phone call
channels, and check the propagation on each chan-
nel to select the channel of good signal quality. (p.
24)
• Sending Phone call
q On the Memory Channel display, push [
enter the Call select menu.
w Push [t](§) or [u](§§§) to select the Call to "SEL-
CALL," then push [
e Push [t](§) or [u](§§§) to select the Call type to
"PHONE."
• "SELECTIVE," "PHONE," "MESSAGE," "SEND POSI-
TION," "GET POSITION," "GET STATUS," "EMERGENCY"
and "CHANNEL TEST" are selectable.
r Push [ ] to forward to the next screen.
• Push [HOME] to return to the previous screen.
❍ Phone number input
Push numeral keys to enter the Phone number.
• Push [8] to delete the number.
• This Number is not stored in the Phone address
list.
❍ Phone address selection
➥ Push [List](§§) to call the list selection mode.
➥ Push [t](§) or [u](§§§) to select the Phone
address.
• Push [Edit](§§) to return to the direct input mode.
t Push [ ] to forward to the next screen.
• Push [HOME] to return to the previous screen.
❍ Phone Link selection
Push [t](§) or [u](§§§) to select the Network.
18
] to
] to enter the Selcall menu.
❍ Phone Link input
➥ Push [Edit](§§) to call the direct input mode.
➥ Push numeral keys to enter the Phone Link.
• Push [8] to delete the number.
• This Phone Link is not stored in the Phone Link list.
• Push [List](§§) to return to the list selection mode.
y Push [ ] to forward to the next screen.
• Push [HOME] to return to the previous screen.
❍ Network selection
Push [t](§) or [u](§§§) to select the Network.
u Push [ ] to forward to the next screen.
• Push [HOME] to return to the previous screen.
❍ Self ID selection
Push [t](§) or [u](§§§) to select the Self ID.
❍ Self ID input
➥ Push [Edit](§§) to call the direct input mode.
➥ Push numeral keys to enter the Self ID.
• Push [8] to delete the number.
• This Self ID is overwritten or stored in the Self ID list.
• Push [List](§§) to return to the list selection mode.
i Push [ ] to enter the Channel Menu, and then
push [t](§) or [u](§§§) to select the desired oper-
ating channel.
• Push [HOME] to return to Selcall menu.
o Push [ ] to transmit the Phone call. The call is
stored in the Call Out memory.
• While calling, push [PTT] to cancel the call.
You can also transmit the Phone call on the Selcall
Address display. In this case, you can skip above
steps q to r, after selecting the Phone call ad-
dress.