Icom IC-F8100 Instruction Manual page 37

5
MENU SCREEN
D Admin Menu items
Tuner type
This item selects the connected Icom antenna tuner
from AT-140, AT230 and OFF.
(default: OFF)
TX Timeout
This item turns the Time-Out Timer function ON (1, 3,
5 or 10 minutes) or OFF. If a continuous transmission
exceeds the selected time period, the transmission
will be cut off, to prevent a prolonged transmission.
(default: 3min)
CW Break-In
This item turns the CW Break-In function ON (0.5, 1,
2 or 3 seconds) or OFF.
The CW Break-In function toggles transmit and re-
ceive with CW keying, and this allows you to mute
receiving until keying stops with selected delay time.
5
(default: 2.0sec)
AGC
This item turns the Automatic gain control function
ON or OFF. (default: ON)
Clear Talk Level
The Clear Talk function enhances desired signals in
the presence of noise by using the DSP circuit. This
item adjust the Clear Talk Level from 1 (Minimum) to
15 (Maximum). (default: 10)
Meter Type
Sets the transmit meter type to TX POWER or MIC
LEVEL. (default: TX POWER)
FSK Tone
Several mark frequencies are used for FSK operation.
This item selects an FSK mark frequency for almost
any FSK system from 1200 Hz, 1275 Hz, 1487.5 Hz,
1615 Hz, 1700 Hz, 2100 Hz and 2125 Hz.
(default: 1615 Hz)
33