Cpu Reset - Icom IC-F8100 Instruction Manual

ALE Scan Call Time
This item sets a registration of the scan channel num-
ber for your group to set the ALE calling times. Se-
lectable number are 1–100 in 1 steps or AUTO.
AUTO: Same setting as your scan channels.
Advanced User Menu
This item sets the Advanced User Menu ON or OFF.
When this setting is ON, additional set items, Blanker
Level, AGC, Bandwidth, Clarifier, Pre Amp, Speech
Processor, Processor Level, Key Lock and Side Tone
Level appear in the User Menu.
CI-V Baudrate
This item sets the data transfer rate to 300, 1200,
4800, 9600, 19200 bps or AUTO.
CI-V Address
To distinguish equipment, each CI-V transceiver has
its own Icom standard address in hexadecimal code.
The IC-F8100's address is 82h.

■ CPU Reset

If you want to initialize the operating settings in the
User Menu and Admin Menu without clearing mem-
ory channel contents or ID contents.
q Turn OFF the transceiver power, if the transceiver
is powered ON.
w While holding down [r] and [s], push [
ON the transceiver power to reset the CPU.
(default: AUTO)
(default: OFF)
(default: AUTO)
(default: 82h)
] to turn
5
MENU SCREEN
/
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
39