Icom IC-F8100 Instruction Manual page 31

ï ALE AMD
The ALE AMD (Automatic Message Display) sends
and receives up to a 90 character text message.
q On the Memory Channel display, push [
enter the Call select menu.
w Push [t](§) or [u](§§§) to select the Call to "ALE,"
then push [ ] to enter the ALE menu.
e Push [t](§) or [u](§§§) to select the Call type to
"AMD."
• "INDIVIDUAL," "NET," "SOUNDING" and "AMD" are se-
lectable.
r Push [ ] to forward to the next screen.
• Push [HOME] to return to the previous screen.
❍ ALE ID selection
Push [t](§) or [u](§§§) to select the ALE ID.
t Push [ ] to forward to the next screen.
• Push [HOME] to return to the previous screen.
❍ Self ID selection
Push [t](§) or [u](§§§) to select the Self ID.
y Push [ ] to forward to the next screen.
• Push [HOME] to return to the previous screen.
❍ ALE Message selection
Push [t](§) or [u](§§§) to select the ALE Mes-
sage.
u Push [ ] to enter the Channel Menu, and then
push [t](§) or [u](§§§) to select the desired oper-
ating channel.
] to
• Push [HOME] to return to the ALE Menu.
• When <Auto> is selected, the transceiver automatically
selects the best quality channel in order using LQA
table.
i Push [ ] to transmit the ALE AMD call. The call
is stored in the Call Out memory.
• While calling, push [PTT] to cancel the call.
You can also transmit the ALE AMD on the ALE ID
display. In this case, you can skip the Call selec-
tion.
• After ALE call
q After ALE call is finished, push [
Call menu.
• While linking the ALE call, "TERMINATION" appears.
w Push [ ] to transmit the disconnect call.
• Until 'TERMINATION' is transmitted, the channel can-
not be changed.
SELCALL/ALE OPERATION
] to enter the
4
4
27