Scan Resume; Scan Speed - Icom IC-F8100 Instruction Manual

5
MENU SCREEN
Admin Menu items (Continued)
D
Shift Frequency
Set the frequency shift for the Data mode to 1800Hz
USB, 1500Hz USB, 1800 Hz LSB or 1500Hz LSB.
Scan
Set the scan type to ALE, SELCALL, VOICE, CALL,
ALL MEMORY or OFF.

Scan Resume

Set the scan resume ON or OFF.
When this setting is ON, a scan pauses for 10 sec-
onds, then resumes, or resumes after 2 seconds
when the signal disappears.
Scan Auto Start
Sets the scan resume timer to between 1 minute to
10 minutes or OFF, for all scan types. (Default: OFF)
When this setting is ON, scan pauses for the set time
period after your last transmitted, then resumes.

Scan Speed

Set the scan speed for the All Memory scan to HIGH,
MID or LOW.
Selcall Silent
Set the automatic answer back function for the Selcall
ON or OFF.
When OFF is selected, the transceiver automatically
answers back if your station ID is called.
Selcall Time Out
If you are calling a specific station, but no answer is
received, then transceiver cancels waiting for an an-
swer back after this time period.
Set the waiting time for the Selcall answer back while
calling.
41
(Default: 1800Hz USB)
(Default: OFF)
(Default: OFF)
(Default: HIGH)
(Default: OFF)
(Default: 60 sec)