Table of Contents
Advertisement
Figure 3
shows the front panel of the Control Module.
Boot Flash
The Control Module has a boot flash containing the SSR's boot software and configuration
files. The system software image file resides on a PCMCIA card or a TFTP server.
Memory Module
The Control Module uses memory to hold the routing tables and other tables. The
minimum factory configuration for the Control Module includes 64MB of memory (in a
64MB DIMM). You can obtain SSR memory upgrade kits from Cabletron Systems to
increase memory to 128MB (in a 128MB DIMM), 192MB (in one 64MB DIMM and one
128MB DIMM), or 256MB (in two 128MB DIMMs). See
page 64
for the upgrade procedure.
SSR 8000/8600 Getting Started Guide
SSR-CM-2
10/100 Mgmt
Console
Figure 3. Front panel of the Control Module
PCMCIA slot 0
OK
HBT
ERR DIAG
PCMCIA slot 1
"Installing a Memory Upgrade" on
Chapter 1: Features Overview
CONTROL MODULE
Online Offline
Hot
Swap
15
Advertisement
Table of Contents
Need help?
Do you have a question about the SmartSwitch 8000 and is the answer not in the manual?
Questions and answers