Cabletron Systems SmartSwitch 8000 Getting Started Manual page 19

Feature
Bridging and
VLAN protocols
Media interface
protocols
Quality of
Service (QoS)
RMON
Management
Port mirroring
Hot swapping
Load balancing/
sharing
Redundancy
SSR 8000/8600 Getting Started Guide
Specification
• 802.1d Spanning Tree
• 802.1Q (VLAN trunking)
• 802.3 (10Base-T)
• 802.3u (100Base-TX, 100Base-FX)
• 802.3x (1000Base-SX, 1000Base-LX)
• 802.3z (1000Base-SX, 1000Base-LX)
• Layer-2 prioritization (802.1p)
• Layer-3 source-destination flows
• Layer-4 source-destination flows
• Layer-4 application flows
• RMON v1/v2 for each port
• SNMP
• CoreWatch software (GUI)
• Emacs-like Command Line Interface (CLI)
• Traffic to the Control Module
• Traffic from specific ports
• Traffic to specific chassis slots (line cards)
• Line cards
• Control Module (when redundant Control Module is installed
and online)
• Switching Fabric Modules (SSR 8600 only)
• Power Supply (when redundant supply is installed and online)
• Cabletron Systems SmartTRUNK support
• Load Sharing Network Address Translation (LSNAT)
• Redundant and hot-swappable power supplies
• Redundant and hot-swappable Control Modules
• Redundant and hot-swappable Switching Fabric Modules (SSR
8600 only)
• Virtual Router Redundancy Protocol (VRRP)
Chapter 1: Features Overview
5