Figure 7-33 Removing Cutout; Figure 7-34 Connecting The Bracket - NEC Electra Elite 192 Hardware Manual

Issue 6
7 - 28

Figure 7-33 Removing Cutout

2. Remove the display plate from DBM(B)/(E) and
DBM(E), and peel off the cover sheet on both.
3. Insert protruding side of the cable from the DBM(E)
in DBM(B) CN7 or in CN7 of the previous DBM(E).
4. Slide the bracket on DBM(E) being installed into the
groves on DBM(B)/(E) and tighten the nuts and
bolts. Refer to Figure 7-34 Connecting the

Figure 7-34 Connecting the Bracket

Electra Elite
Bracket.
Installing Optional Equipment