Table of Contents
Advertisement
Issue 6
5 - 70
5.5.5
Connectors
The FMS(2)/(4)/(8)-U10 ETU has six connectors:
J2 and J3
¥
Used to install the MDM-F-20 Unit
J9
¥
Connects to the backboard
9-pin RS-232(COM2)
¥
Not used (MDM-F-20 Unit)
RJ-11 modem port(COM2)
¥
Remote connector on serial interface (MDM-F-20
Unit)
9-pin RS-232(COM1)
¥
Local Serial connector on main ETU for direct
connection.
5.5.6
Installation Precautions
The ETUs used in this system make extensive use of
CMOS technology that is very susceptible to static
electricity.
Static discharge must be avoided when handling
ETUs.
Always use the following precautions:
Wear a grounding strap anytime you handle the ETU.
¥
Make all ETU DIP switch setting changes before
¥
inserting it in the KSU. Ensure that KSU is off.
Carry ETU in a conductive polyethylene bag to
¥
prevent static electricity damage.
Installing Electronic Telephone Units
Electra Elite
Advertisement
Chapters
Table of Contents
