Figure 7-22 Closing The Base Plate Cover - NEC Electra Elite 192 Hardware Manual

Issue 6
7 - 18
4. Close the base plate, lead the AC adapter cord out
through the hole, and snap the cover in place.

Figure 7-22 Closing the Base Plate Cover

5. Install a ferrite core (provided with the APR-U Unit)
by looping line cord through the core between the
terminal (1 inch from the terminal) and ESI(8)-U10
ETU. This core is only used with the APR-U Unit.
6. Plug in the power cord on the AC adapter and the
telephone cord in the jack.
Electra Elite
Installing Optional Equipment