Figure 4-33 Psu Fuse Replacement; Figure 4-34 Connecting Built-In Batteries - NEC Electra Elite 192 Hardware Manual

Electra Elite
System Hardware Manual
3.
3.12 Installing Built-In and External Batteries in the KSU
3.12.1 Built-In Battery Installation
1.
Replace the fuses as necessary and return the PSU
to the KSU. Fuse F1 is a 125V, 6A fuse for AC input.
Fuse F101 is a 125V, 6.0A fuse for DC input.
F101 (DC In)

Figure 4-33 PSU Fuse Replacement

Connect the two batteries in series as shown in
Figure 4-34 Connecting Built-In
cord attaches to the red terminal and the black cord
attaches to the black terminal.
Be careful, and properly connect the
terminals of the batteries.

Figure 4-34 Connecting Built-In Batteries

Issue 6
F1 (AC In)
Batteries. The red
4 - 33