Figure 5-28 Tli(2)-U10 Etu - NEC Electra Elite 192 Hardware Manual

Issue 6
5 - 48
4.9 TLI(2)-U10 ETU
4.9.1 Description
The TLI(2)-U10 ETU provides for the termination and
operation of a maximum of two E&M Tie lines (4-wire,
Type I, or Type V, 10 pps or 20 pps, Dial Pulse, or DTMF).
Immediate Start, Delay Start, Wink Start, and second Dial
Tone signaling are also provided. The TLI(2)-U10 ETU
has two built-in DTMF signal detectors.
4.9.2 Installation
A maximum of 16 TLI(2)-U10 ETUs can be installed in
Slots S1~S8 in any system KSU.
TYPE V
SW101
TYPE I

Figure 5-28 TLI(2)-U10 ETU

Installing Electronic Telephone Units
Electra Elite
LED 3
LED 2
LED 1
TYPE V
SW201
TYPE I