NEC Electra Elite 192 Hardware Manual page 97

Hardware Requirements
S 1
ECTION
G
ENERAL
I
NFORMATION
S 2
ECTION
P
ROGRAMMING
S
TATIONS
S 3
ECTION
A S
TTENDANT TATIONS
S 4
ECTION
P
ROGRAMMING FROM
PC
A
System Hardware Manual
The technician should be familiar with the Electra Elite 192 system before
attempting to install it. Review this chapter carefully.
Two programming positions are available in the Electra Elite 192 system.
Station equipment that is connected to the first ESI(8)-U10 ETU is
automatically set as a programming position that must have a display
Multiline Terminal.
An unlimited number of Attendant positions can be assigned in the Electra
Elite 192 system. An Attendant Position can have one to four
DCU-60-1(BK)/(WH) Consoles attached. Each Attendant Console must be
supported by an ESI(8)-U10 ETU. A maximum of four Attendant Consoles
can be installed in each Electra Elite 192 system.
Electra Elite 192 systems can be programmed using a personal computer.
The Menu Programming option available with PC Programming allows the
technician/end-user easy access to all information that can be
programmed on the Electra Elite 192 system. The PC must be a 486 or
higher and have Windows 95 or higher to be compatible with the Electra
Elite 192 system.
C h a p t e r 3
3 - 1