Figure 7-12 Ada-U Unit; Figure 7-13 Attaching Cables To The Ada-U Unit - NEC Electra Elite 192 Hardware Manual

Electra Elite
System Hardware Manual
3.2.2 Connecting Cables to the ADA-U Unit
Cable terminal connectors are located on the right side of
the ADA-U Unit. Cables should be connected on this unit
before installing the unit on the Multiline Terminal.
1. Cut off the plug on one end of the cable.
2. Locate the adapter terminals on the right side of the
unit as illustrated in
3. Remove the cap on the adapter terminal to expose
the metal receptacle. Push the cable in the
applicable receptacle, and replace the cap. Line up
the slot on the cap with the slot on the metal
receptacle to ensure proper contact. Refer to
7-13 Attaching Cables to the ADA-U

Figure 7-13 Attaching Cables to the ADA-U Unit

Figure 7-12 ADA-U Unit

Figure 7-12 ADA-U
Issue 6
Terminals
Unit.
Figure
Unit.
7 - 9