Figure 7-63 Attaching The Multiline Terminal To The Wmu-U Unit - NEC Electra Elite 192 Hardware Manual

Electra Elite
System Hardware Manual
7. Connect the line cord to the Multiline Terminal.
8. With the WMU-U Unit attached to the wall, hook the
two bottom tabs on the WMU-U Mount Unit in the
tab slots on the Multiline Terminal. Then push the
two top tabs on the WMU-U Unit into the tab slots on
the Multiline Terminal. When the adapter has a
power supply, lead the AC adapter cord out through
the opening at the bottom of the Multiline Terminal.
Refer to Figure 7-63 Attaching the Multiline Terminal
to the WMU-U
Multiline
Terminal
Adapter

Figure 7-63 Attaching the Multiline Terminal to the WMU-U Unit

Unit.
WMU-U Unit
Tab Slots
Issue 6
Wall
7 - 49