Disassembling Input Bevel Pinion - BMW R 1100 RT Repair Manual

Disassembling input bevel pinion

•
Remove outer bearing race (7).
•
Remove spacer ring (8) from housing.
•
Clamp input bevel pinion (6) into vise with protec-
tive jaws (splines facing upwards).
00 7 500
•
Using puller, BMW No. 00 7 500, pull off both
bearings at the same time.
•
Take off ball thrust bearing (9), inner race (10),
roller bearing cage (11) and outer race (12)
12
8
LT330040
11
10
9
6
LT330030
7
33.11