Removing And Installing Starter Motor - BMW R 1100 RT Repair Manual

Removing and installing starter
motor
•
Remove dualseat.
•
[RS/RT] Remove left side section of fairing.
e
Caution:
Disconnect ground (earth) lead from battery. Insu-
late ground (earth) lead.
•
[RS/GS/R] Remove cover (1) for starter motor
and pull off wire (2) for power socket.
•
Detach connecting lead (3).
•
Take out retaining screws (4) and remove the
starter motor.
•
Install in the reverse order of work.
X
Tightening torque:
Starter motor to engine ................................ 20 Nm
Starter motor cover to gearbox housing ......... 7 Nm
Positive lead to starter motor........................ 10 Nm
12.12
4
2
1
3
4
RS120140