Checking/adjusting clutch operat-
ing clearance
(Inspection I, II, III)
•
Set distance A at the adjusting screw.
Distance A:.................................. 12 mm (0.472 in)
21 3 610
•
[GS] If necessary, slacken off hydraulic spring
adjuster with 6 mm Allen key,
BMW No. 31 5 600.
•
[RT] Slacken off the power socket holder.
•
Using socket wrench, BMW No. 21 3 610,
slacken off locknut (1) at adjusting screw (2) on
the clutch release lever/gearbox.
00.36
RS210020
•
Set to distance B at the handlebar clutch lever,
using the adjusting screw on the release lever.
Distance B: ............................... 7.0 mm (0.276 in)
X
Tightening torque:
Locknut on adjusting screw ......................... 22 Nm
1
2
RS210030
RS210040