Using Directory; Using Last Number Redial (Lnr); Using And Entering Save Number Dial; Using System Speed Dial Numbers - iPECS LIP-8012D User Manual

LIP-7016D/7024D
3.3

Using Directory

3.3.1 Using Last Number Redial (LNR)

The last number dialed on an external call is automatically saved in the
Last Number Redial (LNR) buffer. For users of an iPECS Display
Phone, the system will store the numbers dialed on the last 15 calls.
OPERATION
To dial the Last Number for an external call:

Select the DIR Soft button,

Press the SPEED Soft button,

Dial '*'.

Press navigation UP/DOWN key to select from the last 15 numbers
dialed,

Press the Send

3.3.2 Using and Entering Save Number Dial

You may store the last number dialed on an external call to the Save
Number Dial buffer for convenient dialing at a later time. The Save
Number is stored until you save new number.
OPERATION
To place a call using Save Number Dial:

Select the DIR Soft button,

Press the SPEED Soft button,

Dial #.
To store a number in the Save Number Dial:

While on an outgoing external call, press the SAVE Soft button.

3.3.3 Using System Speed Dial Numbers

The iPECS-100 system has memory allocated for 800 System Speed
Dial numbers (bins 200-999). The iPECS-300 & 600 systems each have
memory allocated for 3000 System Speed Dial numbers (bins 2000-
4999). You may, if allowed, use System Speed Dial to call frequently
dialed numbers.
In some cases, these numbers are divided into groups called System
Speed Zone Groups. In this case, you may access some numbers and
not others and your dialing restrictions may be invoked.
Only an Attendant can assign System Speed Dial numbers.
OPERATION
Soft button or
HOLD
/
.
SAVE
21
User Guide