LIP-7016D/7024D
6. Remote System Access
6.1
Direct Inward System Access (DISA)
DISA (Direct Inward System Access) allows remote users to gain access
to the system's resources. The system will recognize remote user dialed
inputs (call other stations, place calls over CO/IP lines, review voice
mails, etc). Remote users may be required to enter an
Code.
OPERATION
To access system resources remotely:
Call the system's DISA facility,
Await answer and dial your authorization code (station number and
password),
Dial as needed for the desired system resource.
6.2
Mobile Phone Extension
When away from your desk or office you can place and receive iPECS
calls on a registered mobile phone. You may need to activate the Mobile
Phone Extension feature and assign the Mobile Phone number.
This feature is only effective with an ISDN CO line.
OPERATION
To register a mobile phone number:
Press the
Dial 37,
Dial the mobile phone number,
Press the
To activate a registered mobile phone from the user's station:
Press the
Dial 38,
1 to activate, 0 to deactivate,
Press the
To place a call from the mobile extension using the iPECS:
Dial the ISDN DID number of the station, the system will check the
Caller Id, answer the call and the user will receive intercom dial
tone,
Place internal or external iPECS call as normal.
To Transfer a call from the mobile extension using the iPECS:
Dial "*" while on an iPECS call,
/
button,
TRANS
PGM
/
button.
HOLD
SAVE
/
button,
TRANS
PGM
/
button.
HOLD
SAVE
33
User Guide
Authorization