Map Operation And Settings - Mercedes-Benz COMAND Operating Instructions Manual

Set map scale as a number with unit
:
Currently set map scale as indicated by
;
the needle on the scale bar
Map scale
=
Unit of measurement : in the COMAND
display depends on the selection made for the
instrument cluster (see the vehicle
Operator's Manual).
Moving the map
Showing the crosshair
To hide the menu: slide ZV the COMAND
X
controller and, when the
menu item is shown, press W.
To scroll the map: slide XVY, ZVÆ or
X
aVb the COMAND controller.
A crosshair appears on the map. If you slide
it again, the map moves in the
corresponding direction under the
crosshair.
Map with crosshair
Current vehicle position
:
Crosshair
;
Details of the crosshair position
=
Map scale selected
?
Display = may be the name of a street, for
example, provided the digital map contains
the necessary data. Alternatively, it may show
the geo-coordinate position of the crosshair
if the
on (
Y
Hiding the crosshair and centering the
map on the vehicle position or
destination
Press the % back button twice.
X
The crosshair disappears and the map is
set to the vehicle position.
or
Set the map to the vehicle position; see the
X
explanation below.
Centering the map on the vehicle or
destination position
Centering the map on the vehicle
Full Screen
position
To show the menu: press W the COMAND
X
controller.
Select
X
menu bar by sliding VÆ and turning cVd
the COMAND controller and press W to
confirm.
Select
X
W to confirm or, if the crosshair is shown,
press the % back button.
This hides the crosshair.
Centering on the destination
This function requires that a route to a
destination has been calculated. If the route
includes waypoints and an intermediate stop,
the map can also be set to these positions.
To show the menu: press W the COMAND
X
controller.
Select
X
menu bar by sliding VÆ and turning cVd

Map operation and settings

Geo-coordinates display is switched
page 102).
Position in the navigation system
Vehicle Position Map
Position in the navigation system
99
and press
Z