Entering Characters - Mercedes-Benz COMAND Operating Instructions Manual

Character entry (telephony)
34
When playing using an iPod
should also be at least 224 kbit/s.
For optimum playback quality:
Deactivate the "EQ" setting on the
X
®
iPod .
Surround-sound playback does not func-
tion for mono signal sources, such as the
medium wave range (MW) in radio mode.
On some stereo recordings, the sound
characteristics may differ from conven-
tional stereo playback.
Character entry (telephony)
Example: entering characters
To switch the character bar to upper-
: *
case/lowercase letters
To switch the character bar from
; p
uppercase/lowercase letters to dig-
its
To change the language of the char-
= B
acter bar
To delete a character/an entry
? 2
The example describes how to enter the sur-
name "Schulz".
Call up the input menu with data fields
X
( page 139).
Y
Select S S and confirm W with the COMAND
X
controller.
S S appears in the data field.
® Select
, the bit rate
X
controller.
The letter
Repeat the process until the name has
X
been entered in full.
Other input menu functions:
Deleting a character/an entry
R
(
Switching between upper/lower-case let-
R
ters (
Changing the character set (
R
Moving the cursor to the next data field
R
(
To enter a phone number: select the dig-
X
its one by one in the corresponding data
field by turning cVd and sliding ZVÆ the
COMAND controller and press W to con-
firm.
Switching data fields
:
;
=
In the input menu, if you want to enter a first
name after you have entered a surname, for
example, proceed as follows to switch
between the data fields:
Option 1
Select 4 or 5 in the character bar and
X
press W to confirm.
The input menu shows the data field
selected.
c c and confirm W with the COMAND
c c is added to
page 35)
Y
page 35)
Y
page 35)
Y
Cursor in the next data field
To store the entry
4 and 5 symbols to select a data field
S S in the data field.
page 35)
Y