System Settings - Mercedes-Benz COMAND Operating Instructions Manual

Your multimedia system equipment
These operating instructions describe all the
standard and optional equipment of your multi-
media system, as available at the time of going
to press. Country-specific differences are pos-
sible. Bear in mind that your vehicle may not
feature all functions described here. This also
applies to safety-relevant systems and func-
tions.
Read the information on qualified specialist
workshops in the vehicle Operator's Manual.
Important safety notes
G
WARNING
If you operate mobile communication equip-
ment while driving, you will be distracted from
traffic conditions. You could also lose control
of the vehicle. There is a risk of an accident.
Only operate this equipment when the vehicle
is stationary.
G
WARNING
SD memory cards are small parts. They can be
swallowed and cause asphyxiation. This
poses an increased risk of injury or even fatal
injury.
Keep SD memory cards out of the reach of
children. If an SD memory card is swallowed,
seek immediate medical attention.
You must observe the legal requirements for the
country in which you are currently driving when
operating mobile communications equipment in
the vehicle.
Display settings
Setting the brightness
The brightness detected by the display light sen-
sor affects the setting options for this function.
Press the Ø button.
X
or
Press Vehicle in the main function bar.
X
The vehicle menu is displayed.
To select System Settings: slide 6, turn
X
and press the controller.
A menu appears.
To select Display: turn and press the con-
X
troller.
A menu appears.
Select Brightness.
X
A control appears.
To select the desired brightness: turn and
X
press the controller.
Display design
The display features optimized designs for day-
time and night-time operation. You can set the
design by manually selecting day or night design
or opt for an automatic setting.
Press the Ø button.
X
or
Press Vehicle in the main function bar.
X
The vehicle menu is displayed.
To select System Settings: slide 6, turn
X
and press the controller.
A menu appears.
To select Display: turn and press the con-
X
troller.
A menu appears.
To select Day Mode,
X
turn and press the controller.
The # dot indicates the current setting.
Display settings
Night Mode or Auto:
Z
33