Setting The System Language; Reset Function - Mercedes-Benz COMAND control panel Operating Instructions Manual

Setting the system language

This function allows you to determine the
language for the menu displays and the
navigation announcements. The selected
language affects the characters available for
entry.
When you set the system language, the
language of the Voice Control System will
change accordingly. If the selected language
is not supported by the Voice Control System,
"English" will be selected.
Press the S button.
X
Select Language and press W to confirm.
X
The list of languages appears. The # dot
indicates the current setting.
Select the language by turning cVd the
X
COMAND controller and press W to
confirm.
COMAND loads the selected language and
sets it.

Reset function

You can reset COMAND to the factory
settings. Amongst other things, this will
delete all personal data (e.g. station presets,
address book entries, entries in the
destination memory and in the list of previous
destinations in the navigation system).
Resetting is recommended before selling or
transferring ownership of your vehicle, for
example.
Data on the internal hard drive, e.g. music
files in the MUSIC REGISTER, will be deleted.
You can also delete music files from the
MUSIC REGISTER using the "Delete all music
files" ( page 138) function.
Y
Press the S function button.
X
Select Settings by turning cVd the
X
COMAND controller and press W to
confirm.
Reset function
Select Reset and press W to confirm.
X
A prompt appears asking whether you wish
to reset.
Select Yes or No and press W to confirm.
X
If you select No, the process will be aborted.
If you select Yes, a prompt will appear again
asking whether you really wish to reset.
Select Yes or No and press W to confirm.
X
If you select Yes, a message will be shown.
COMAND is reset and restarted.
If you select No, the process will be aborted.
45