Accessing the Menu
The Menu allows you to configure your DVR settings and program various recording options.
Follow these steps in order to access the Menu:
Press the MENU button. The password screen will appear:
The default Password is 0000. If you have not yet pro-
grammed or changed it. In this case, you can simply press
the Enter button to access the Menu.
To change the number of the Password, use the ◄ and ► buttons to scroll between numbers, and use the
▲and ▼buttons to change the value of the number that is blinking.
Press the ENTER button once the correct Password is entered. The menu options screen will appear.
Note: If you get a message "Password Error", you have entered an incorrect password.
Main Menu
There are 6 options available in the Main Menu:
Timer:
Programs specific times that you want the DVR to record
Record: Controls the speed, quality and mode of recording
Alarm:
Programs Alarm duration and recording during an Alarm
Remote: Chooses interface for remote protocol via computer
System: Sets the date, chooses an HDD overwrite setting, changes
Password, resets system settings, or clears the HDD
Event:
Allows you to view video from a list of recorded events
Navigating the Menu:
▲ and ▼: Scroll up and down through menu options; change values when an option is selected and is
blinking
◄ and ►: Scroll sideways within a menu option that has been selected
ENTER:
Selects a submenu / an option in a submenu for browsing / modification
MENU:
Completes modification of a menu option; exits a menu
NOTE: The Menu setup will timeout after 1 minute of no key presses.
Password: 0000
(Menu)
Timer
Record
Alarm
Remote
System
Event
8